Tech

Shift Light Specifications:   

         

  • Ultra Precision, digital microprocessor technology! Much more accurate than old fashioned analog shift lights!

  • Self Contained, no rpm activation modules or "pills" needed!

  • No tach adaptor needed for new "Coil-on-Plug" with multi-spark ignitions!

  • Works on all ignition systems, excluding magneto ignitions (such as 2 stroke bikes). Can be connected to "tach out" terminal of aftermarket CDI ignition boxes, but not at coil due to extreme voltages generated.

  • Fast and easy RPM setting with rotary dip switches (x1000 RPM and x100 RPM)

  • 1000-9900 RPM range adjustable in 100 RPM increments (the RPM range can be doubled to a maximum of 19,800 RPM by doubling the cylinder select switches for your vehicle and setting the RPM to 1/2 of the desired RPM activation point).

  • 1, 2, 3, 4, 5, 6 or 8 cylinder engines (set by 3 position slide switch)

  • 5 or 12 volt tach signal operation (ECM or coil)

    •

  • Seven high intensity LEDS available in red, green, yellow or blue

  • Black, silver, red or blue anodized 6061-T6 aluminum housings

  • 0.75 inch diameter x 3.125 inches long

  • 10 ft. cable (black jacket)

    •

  • Simple 3 wire hookup: red=12VDC, black=ground, green=tach lead

  • Shipped with 2 types of mounting brackets

  • 4 ounce total weight with 10' cable