Tech

RPM Activated Switch Specifications:   

         

  • Ultra Precision, digital microprocessor technology!

  • Self Contained, no rpm activation modules or "pills" needed!

  • No tach adaptor needed for new "Coil-on-Plug" with multi-spark ignitions!

  • Works on all ignition systems, excluding magneto ignitions (such as 2 stroke bikes). Can be connected to "tach out" terminal of aftermarket CDI ignition boxes, but not at coil due to extreme voltages generated.

  • Fast and easy RPM setting with rotary dip switches (x1000 RPM and x100 RPM)

  • 1000-9900 RPM range adjustable in 100 RPM increments (the RPM range can be doubled to a maximum of 19,800 RPM by doubling the cylinder select switches for your vehicle and setting the RPM to 1/2 of the desired RPM activation point).

  • 1, 2, 3, 4, 5, 6 or 8 cylinder engines (set by rotary switch)

  • 5 or 12 volt tach signal operation (ECM or coil)

  • 2 Amp Relay contact (protected with thermal resettable fuse)

  • Normally open and normally closed relay contact (closes or opens to make or break contact with internal ground)

    •

  • Status LED: Indicates various operating conditions such as "no tach signal", "activated switch", error modes, etc.

  • ABS plastic enclosure potted for extreme durability

  • 2.5" W x 2.5" L x 1" tall enclosure

  • removable 5 position connector

  • included 10 foot, 3 conductor black cable (power, ground and tach signal)

    •

 

 

 

 

Related resources